mandatory
mandatory

Author Topic: SPS500 Series Internal Printer Graphic Logo  (Read 4433 times)

Offline Lindsay McPhee

  • Administrator
  • *****
  • Posts: 165
  • Karma: +2/-0
  • Gender: Male
  • 2B OR NOT 2B = FF
    • Skype - lindsaymcp
    • Goodson Imports
SPS500 Series Internal Printer Graphic Logo
« Reply #1 on: September 06, 2013, 01:33:30 PM »
 
If you want to load your own graphic logos for printing on the receipt printer follow the proceedure below.
 
1.  Prepare logo images.
You can have up to 15 logo images in SPS-5xx.
The maximum size is 576 x x240 for SPS-530 and 384 x 240 for SPS-520.
Images should be in black & white (monocrome - 1 bit colour) BMP file
Black and white images inside a coulour file will be rejected by the software with an error message.
Greyscale images will be rejected by the software with an error message.
 
Filenames MUST be logo_xx.BMP.  where xx is a number between 01 and 15
 
2. Copy images to an SD card. They should be in SD:/update/sps500 folder.
 
3. Enter to the system menu then select SETUP --> Logo Define --> Logo Def. SD (Logo Def. TFTP)
 
 
More comprehensive instructions are attached.
 
regards,

Lindsay McPhee
Technical Support, Training and Product Development
Goodson Imports Pty Ltd