mandatory
mandatory

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
General / ERxxxx Command line comms package
« Last post by Lindsay McPhee on May 05, 2016, 03:37:29 PM »
Hi All,

pleaser find ERComms package attached. 
Suitable for current versions of:
ER230
ER380   /M /B
ER390M /B
ER420M
ER430M
ER5200 /M
ER9x0M


22
Hi All,

Please find the SPS300 series comms attached.
23
Printer Software / Bixolon Ethernet Configure Utility
« Last post by Lindsay McPhee on April 22, 2016, 04:32:38 PM »
Hi All,

Please find the utility attached below.
24
Printer Software / Aura PP8800 Printer drivers
« Last post by Lindsay McPhee on March 08, 2016, 11:33:50 AM »
Hi All,

Please find the 32 bit, 64 bit and the USB VCOM driver attached.  These are compatible with Win XP, Win 7, and Win8.
25
SPS500 series (530) / SPS530 Command line/Batch file communications software
« Last post by Lindsay McPhee on March 08, 2016, 11:12:50 AM »
Hi All,

Please see attached zip file containing command line or batch file communications software.  This is mainly used by software developers and people with a high technical understanding to be able to import and export the data between the cash register and an inventory controls application.

Most users will require the PC Utility to back restore and edit the programming on a PC found
http://www.forum.goodson.com.au/index.php/topic,233.0.html  for register firmware prior to firmware version 1.00K
and
http://www.forum.goodson.com.au/index.php/topic,217.0.html for register firmware after firmware version 1.00 O.

The intervening firmware versions were not released in Australia.
26
ER390M / Re: ER390M Programming Software
« Last post by Lindsay McPhee on March 03, 2016, 09:51:15 AM »
Hi Shayne,

The cable pinout of the PC comms cable is:

       2 ----- 3
       3 ----- 2
       5 ----- 5
and solder the shield to the body of the connectors at both ends with a bit of heat shrink to insulate it from the pins of the connector.

The computer end is a Female db9 connector
The Register end is a Male db9 connector

The main thing is to make sure you pick up the right pin numbers on the back of the connector.  They are usually labelled on the front, but when you turn the connector around to solder it, pin 1 which may have been on the left of the front is now on the right at the rear...  And the pin numbers on the male and female are mirror image also.

You don't need to worry about which end is which when you are soldering it together as it is simply a crossover of Transmit and Receive wires with the ground going straight through. 
27
ER390M / Re: ER390M Pfrogramming Software
« Last post by gte on March 02, 2016, 05:23:07 PM »
Hi Lindsay,


Do you know what the pinouts required for the serial PC cable.


Shayne
28
Touch Screen Software / IMT2000/3000 Touch Driver
« Last post by Lindsay McPhee on February 26, 2016, 11:40:34 AM »
Hi All,

Please find the driver attached below.
29
SPS500 series (530) / SPS530 PC Utility Version 3.1.9
« Last post by Lindsay McPhee on February 12, 2016, 10:45:07 AM »
Hi All,

Please find the old version of the SPS530 PC Utility attached..
This is suitable for Firmware version up to and including 1.00K.  If your firmware is newer than 1.00K, please use Utility version 3.1.22 found at http://www.forum.goodson.com.au/index.php/topic,217.0.html instead.
30
ER260 ER265 / ER260/ER265 programming Software
« Last post by Lindsay McPhee on February 12, 2016, 10:37:06 AM »
Hi All,

Please find the ER26x PC Utility attached below
Pages: 1 2 [3] 4 5 ... 10
anything